Characteristics
and Advantages
Deep-draw
moulding integral wash tank has no dead angle of sanitation, and is easy to be cleaned.
Unique inward
curving nozzle improves the contact area of tableware and water flow to ensure no
dead angle of spray.
Automatic
start/stop program reduces water and electricity consumption.
Dual
temperature control design of rinsing maintains stable spray temperature.
Anti-dry heating
design of wash tank and booster make it safe and reliable.
Double
rinse system ensures better rinse effect and achieves nearly 20% cost saving.
Optional
heat recovery module could further reduce the machine energy consumption.
Installation and
Connection Requirements
Power requirements: 380V/50Hz/3Ph+Neutral
+ Ground,with an external separate air circuit breaker.
Machine can be directly connected to
water supply system, the
lowest incoming water pressure should be 2Kg/cm2.
If a hood or vent needed, the inlet
capacity should be 5.7m3/min and the outlet 11.3 m3/min.
Ideal For
Medium hotels, guest houses, chain
–restaurants and dining halls.
Parameters
Item/Model C200R
Power Requirements 380V/50Hz/3P
Heating Electricity Electricity Steam
Incoming water temperature(℃) 10-60 40-60 10-60
Tank heater(Kw) 7.5 7.5 -
Booster heater(Kw) 9×4 9×2 -
Total steam consumption(kg/h) - - 75
Wash
Pump (Kw) 1.9 1.9 1.9
Rinse Pump (Kw) 0.25 0.25 0.25
Total connected load(Kw) 46 28 2.5
Total Amps required(A) 70 43 4
Cross section of cable (mm2) 25 10 2.5
Rated current of air circuit breaker(A) 100 63 16
Appearance dimension(mm) 1750×779×1823
Passing width (mm) 508
Max clear entry height(mm) 450
Max capacity(rack/hour) 200
Water consumption(liter/rack) 2
Wash tank capacity(liter) 90
Booster capacity(liter) 20.8
Wash temperature(℃) 60~65
Rinse temperature(℃) 82~90
Diameter of the water inlet hose(in) 3/4
Diameter of drainpipe(in) 2
Incoming water pressure(Kg/cm2) 2~5
Updated: 2017/11/2